The SmallRig Cold Shoe Mount review is for camera-rig builders who need a straightforward way to add accessory slots to compatible cages, handles, or plates.
This two-pack uses a threaded attachment and includes screws and hex spanners for installation.
SmallRig Shoe Mount Review Summary
The quick verdict

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical fit for camera-rig builders who need compact cold shoe attachment points for microphones, flashes, or LED lights.
- Two cold shoe mounts are included in the package.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction.
- Can attach to compatible accessories with 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.
Pros
- Two mounts provide more than one accessory position in a single pack.
- Includes fasteners for the stated 1/4-inch and M2.5 mounting approaches.
Consider before buying
- The design is a fixed mount, so it does not provide the angle adjustment of a ball-head adapter.
- It is not suitable for DJI or ZHIYUN gimbals.
Read the full review summary
SmallRig’s 2060 mounts give you two cold shoe points for attaching a microphone, flash, or LED accessory to compatible camera-rig hardware.
Each mount measures 25 × 25 mm and is made from aluminum alloy, keeping the mounting piece compact while offering a dedicated accessory slot.
The design favors a fixed, simple connection over adjustable positioning: the mount attaches through 1/4-inch or M2.5 threaded holes, with two M2.5 screws and a 1/4-inch screw supplied for the stated configurations.
It suits photographers and video creators building out a compatible cage, handle, or plate, provided the mounting surface and device setup match the stated limits.
The buying factors
SmallRig Shoe Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Rig compatibility
Supports common 1/4-inch and M2.5 threaded attachment points, with specific exceptions to check before installation.
Accessory usefulness
Provides a cold shoe point for a microphone, flash, or LED on compatible camera accessories.
Installation flexibility
Includes both 1/4-inch and M2.5 fasteners, though the correct method depends on the rig.
Pack value
Two mounts are included, useful for adding more than one accessory position or keeping a spare.
Build material
Aluminum alloy offers a compact metal mounting piece; no further durability claims are needed.
Position adjustment
The described design provides a fixed shoe position rather than a tilting or swiveling head.
Key Features and Specifications of SmallRig Shoe Mount
- Two cold shoe mounts are included in the package.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction.
- Can attach to compatible accessories with 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.
- The mount can hold a microphone, flash, or LED accessory on compatible camera-rig hardware.
- Package includes two 1/4-inch screws, four M2.5 screws, and two hex spanners.
- White arrows indicate mounting direction, and bent bevels on one end are designed to help prevent accidental removal.
Pros and Cons of SmallRig Shoe Mount
Pros
- Two mounts provide more than one accessory position in a single pack.
- Includes fasteners for the stated 1/4-inch and M2.5 mounting approaches.
- Compact 25 mm square footprint is suited to adding a shoe point without a large adapter assembly.
- The directional arrows and beveled end provide visible installation cues.
Consider before buying
- The design is a fixed mount, so it does not provide the angle adjustment of a ball-head adapter.
- It is not suitable for DJI or ZHIYUN gimbals.
- For most cages, installation uses the 1/4-inch screw; the M2.5 setup is unnecessary, with a specific exception for SmallRig Full Cage 1661.
Who Should Buy SmallRig Shoe Mount?
Good fit
Consider this two-pack if your camera cage, handle, or plate has a compatible threaded hole and you want a direct cold shoe point for a microphone, flash, or LED.
Having two mounts can help when you are setting up multiple accessories or want an extra mount available for another rig.
Before buying, check the mounting point and intended installation method against your setup.
The description calls out that this mount is unsuitable for DJI and ZHIYUN gimbals, and that most cages use the included 1/4-inch screw rather than the M2.5 screws.
Who should skip it
Skip this model if you need an adjustable angle for the attached accessory; its described design is a fixed cold shoe mount.
If your setup is a DJI or ZHIYUN gimbal, choose a mount specifically suited to that system.
How the SmallRig Shoe Mount Fits a Camera Rig
Threaded mounting keeps the setup direct
The 2060 attaches to compatible 1/4-inch or M2.5 threaded holes, so the useful question is what your cage, handle, or plate actually provides.
The included screws cover the noted configurations, but the product guidance says most cages use the 1/4-inch screw and do not require the M2.5 screws.
A fixed shoe suits straightforward accessory placement
This mount adds a cold shoe slot for common rig accessories such as a microphone, flash, or LED.
Because the described mount does not include a ball head or tilt mechanism, it is best for a position that can remain fixed once installed.
Two pieces can support a more modular rig
The two-pack can add separate attachment points across compatible camera accessories, or give you a second mount for another setup.
Its compact 25 mm square dimensions make it a small addition, although buyers should still confirm there is room around neighboring controls and accessories.
Check the stated system exceptions
The mount is explicitly unsuitable for DJI and ZHIYUN gimbals.
SmallRig Full Cage 1661 is also called out as an exception to the general installation note, so owners of that cage should confirm the appropriate fastening method before mounting.
Alternatives to SmallRig Shoe Mount
Camera Flash Shoe Mounts alternative

1,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Adapter with Shoe Mount 1135
Choose the 2060 for simple fixed shoe points and two mounts. Consider the 1135 if you need to adjust an accessory’s angle and its ball-head design and stated load recommendation suit your setup.
- The 1135 has a double ball head that rotates through 180 degrees and locks with a side wingnut; it has a shoe base and 1/4-inch screw, and its stated maximum weight recommendation is 1 kg.
- The 2060 is a fixed cold shoe mount supplied as a two-pack and attaches through compatible 1/4-inch or M2.5 threaded holes.
Camera Flash Shoe Mounts alternative

700+ ratings
Read Amazon ReviewsSmallRig Mini Ball Head Cold Shoe Mount Adapter 3577
The 2060 is a better fit when you want two fixed mounting points and your rig offers the specified threaded holes.
The 3577 is worth considering for a single lightweight device when tilt adjustment and tool-free cold shoe installation matter more.
- The 3577 is a compact ball-head mount that tilts up to 138 degrees, weighs 20 g, and supports devices up to 250 g; its base uses a cold shoe adapter.
- The 2060 provides two fixed shoe mounts for compatible threaded camera-rig attachment points.
Is SmallRig Shoe Mount Worth It?
The SmallRig Cold Shoe Mount 2060 is worth considering for a compatible cage, handle, or plate when you want two compact, fixed shoe points for common camera accessories.
Its supplied screws and hex spanners make the intended mounting approaches clear, while the aluminum alloy construction keeps the form factor simple.
Check the rig’s thread and the stated gimbal exclusions before choosing it.
If you need angle adjustment, one of the ball-head alternatives may suit that requirement better; if you need a straightforward fixed mount and the attachment point matches, the two-pack is a practical option.
Your review at a glance

3,000+ ratings
Read Amazon ReviewsSmallRig Cold Shoe Mount 2060
A practical fit for camera-rig builders who need compact cold shoe attachment points for microphones, flashes, or LED lights.
- Two cold shoe mounts are included in the package.
- Each mount measures 25 × 25 mm (0.98 × 0.98 inches).
- Aluminum alloy construction.
- Can attach to compatible accessories with 1/4-inch or M2.5 threaded holes, including cages, handles, plates, and cold shoe blocks.